Lighting installation in Lithia, FL
Recessed cans, a pendant light over a kitchen island, or a statement chandelier in the entryway. We handle the wiring and mounting so the fixture you picked out actually looks right, with same-day appointments and 24-hour emergency service if a lighting issue turns into a safety concern.
Lighting we install most in Lithia homes
Every fixture type has its own wiring and mounting needs. Here's what we handle most often.
Recessed lighting
Clean, low-profile lighting that works well for kitchens, living rooms, and hallways. Spacing matters more than most people expect.
Pendant lights
A favorite over kitchen islands and dining tables. We confirm the right mounting height and box support before hanging one.
Chandeliers
Heavier fixtures need a fan-rated or reinforced junction box, not just drywall. We check the support before mounting anything large.
Under-cabinet lighting
Task lighting for kitchen counters, wired cleanly so there are no visible cords running along the backsplash.
Vanity and bathroom lighting
Bathroom fixtures need the right damp or wet rating depending on how close they sit to the shower or tub.
Closet and utility lighting
Simple, code-compliant fixtures for closets, laundry rooms, and garages, kept a safe distance from stored items.
Spacing matters more than the fixture itself
A common mistake with recessed lighting is spacing that's too wide, leaving dark patches, or too tight, wasting money on extra fixtures. As a general guide, most rooms need one recessed light for roughly every 25 to 30 square feet of ceiling space, spaced about 4 feet apart and 2 feet from the walls.
We map out the layout with you before cutting anything, so you know exactly what the finished room will look and feel like, not just where the holes are going.
Not every ceiling box can hold a chandelier
A standard ceiling box, especially an old drywall-mounted one, is often only rated for a light fixture weighing a few pounds. A chandelier or large pendant needs a box rated for the weight, secured to a joist or a fan-rated brace, not just the drywall itself.
- If a fixture ever feels loose or the ceiling flexes slightly when it sways, stop using it
- Never assume an existing box can support a heavier replacement fixture without checking first
- A flickering new fixture right after installation often points to a wiring issue, not the bulb
We check the box rating as part of every installation, so you're not finding out the hard way.
Lighting installation pricing guide
Cost depends on the fixture type and whether new wiring is needed. Here's a general range.
Standard fixture swap
Replacing a fixture on an existing junction box.
Per recessed light
Includes cutting, wiring, and mounting each can light.
Pendant or chandelier
Higher end covers fixtures needing new wiring or box reinforcement.
Full room, 6 recessed lights
Typical range for a complete recessed lighting layout in one room.
Related electrical services
Common questions about lighting installation
How much does it cost to install a light fixture?+
A simple swap on an existing junction box typically runs $80 to $180. Recessed lights run $100 to $250 each. Pendants and chandeliers needing new wiring or box reinforcement can run $150 to $400.
How many recessed lights does my room need?+
A general guideline is one recessed light for roughly every 25 to 30 square feet of ceiling. A 200-square-foot room typically needs about 6 to 8 lights, though we'll confirm the exact layout during your estimate.
Can I install a heavier fixture on my existing ceiling box?+
Not always. Standard boxes are often rated for light fixtures only. A chandelier or heavy pendant usually needs a fan-rated or reinforced box secured to a joist, which we check before installation.
Do I need a permit to install new lighting?+
Replacing an existing fixture on the same wiring generally doesn't require a permit. Adding entirely new circuits for lighting usually does, and we'll handle that if it applies to your project.
My new light flickers. Is that normal?+
Not usually. A flicker right after installation often points to a loose connection or a wiring issue rather than the bulb itself. Let us know if this happens so we can take a look.
Do you install smart lighting like Philips Hue?+
Yes, we wire fixtures to work correctly with Philips Hue and similar smart bulb systems, including planning Bridge placement for reliable whole-home coverage.
Can you help me plan the lighting layout, not just install it?+
Yes, that's part of the visit. We'll walk through spacing, fixture placement, and switch locations with you before any cutting or wiring starts.
Ready to light up a room?
Tell us the fixture and the room, and we'll help with layout and get you a clear price. Prefer to reach out online? Visit our contact page.
Serving Lithia and nearby FishHawk, Riverview, and Bloomingdale. See our full service area list or learn more about our team.