Serving Lithia, FL & eastern Hillsborough County 24-hour emergency service available
Contact us
Outlet and switch installation near you

Outlet and switch installation in Lithia, FL

Adding outlets for a home office, upgrading to GFCI protection in a kitchen or bathroom, or swapping out old, cracked switches. We install and replace outlets and switches with same-day appointments and 24-hour emergency service if one becomes unsafe.

GFCI & AFCI compliant Multiple outlets, one visit Same-day appointments
Yellow, blue, and black coated electrical wires ready for an outlet installation
Same-dayInstalls in most cases
24/7Emergency electrician near me
Code-checkedEvery outlet and switch
LicensedFlorida electrical contractor
More than a standard outlet

Outlet and switch options we install

Not every outlet or switch does the same job. Here's what we install most often in Lithia homes.

GFCI outlets

Required by code in kitchens, bathrooms, garages, and outdoor spaces. They cut power fast if they sense current leaking to ground.

AFCI outlets

Detect arcing before it becomes a fire hazard, often required for bedroom and living space circuits under current code.

USB charging outlets

Built-in USB ports for charging phones and tablets directly, without needing a bulky adapter plugged into the outlet.

Dimmer switches

Give you control over how bright a room feels, and can be paired with LED fixtures for even more energy savings.

Smart switches

Control lighting from your phone or a voice assistant. We wire them in correctly so the automation works the first time.

Weatherproof outdoor outlets

Sealed, in-use covers keep outdoor outlets protected from Florida's rain and humidity while staying code-compliant.

Worth knowing before you DIY

Where GFCI protection is required by code

Current electrical code requires GFCI protection in specific areas of the home because of the higher risk of shock near water or damp conditions. If your Lithia home was built or last updated before these areas were required, it's a common and worthwhile upgrade.

  • Kitchens, especially within 6 feet of a sink
  • Bathrooms and laundry areas
  • Garages, basements, and crawl spaces
  • All outdoor outlets and anything near a pool or hot tub

If you're not sure whether your home is up to date, we can check every outlet during a visit and flag anything that's missing required protection.

Adding outlets where you never had enough

Not just replacements

A lot of our outlet work isn't fixing something broken, it's adding what a room never had. Home offices, entertainment centers, and kitchen islands often need outlets that simply weren't part of the original build. We can run new circuits where needed or tap into an existing one, whichever makes sense for your home.

If you're planning a bigger project, like a kitchen remodel or a home office buildout, it's worth combining outlet work with any other electrical services you need done at the same time to save on a second visit.

Close-up of electrical wires being prepared for an outlet installation
What installation typically costs

Outlet and switch pricing guide

Cost depends on whether wiring already exists at the location. Here's a general range.

$100–$200

Standard outlet swap

Replacing an existing outlet where wiring is already in place.

$130–$350

GFCI outlet

Installing or replacing with GFCI protection, including the device.

$150–$350

New outlet location

Running new wiring to a spot without existing wiring, like a home office.

$50–$150

Switch replacement

Including dimmer and smart switch installs where wiring already exists.

Outlet & switch brands we install

Quality hardware built to last

Outlet & switch FAQs

Common questions about outlets and switches

How much does it cost to install a new outlet?+

Replacing an existing outlet where wiring is already there typically runs $100 to $200. Adding an outlet to a new location, where wiring has to be run, usually costs $150 to $350 depending on distance and access.

Do I need a GFCI outlet in my kitchen?+

Yes, current code requires GFCI protection for kitchen outlets, especially within 6 feet of a sink. If your kitchen still has standard outlets, upgrading is a straightforward, worthwhile safety improvement.

Can you add outlets without opening up my walls?+

Often, yes, especially with attic or crawlspace access nearby. Every home is different, so we'll tell you honestly what access looks like for your specific location before starting.

What's the difference between a GFCI outlet and a GFCI breaker?+

A GFCI outlet protects itself and everything wired downstream of it on that circuit. A GFCI breaker protects the entire circuit from inside the panel. Either can satisfy code, and we'll recommend whichever makes more sense for your setup.

Can I install multiple outlets in one visit to save money?+

Yes, and it's usually more cost-effective than scheduling separate visits, since a chunk of the cost is the service call itself. Let us know everything you'd like done when you book.

My outlet only has two prongs. Should I upgrade it?+

Two-prong outlets usually mean the circuit isn't grounded, which is common in older homes. We can evaluate the circuit and recommend the safest, most cost-effective way to add proper grounding.

Need outlets or switches installed?

Tell us how many and where, and we'll get you a clear price and a same-day appointment in most cases. Prefer to reach out online? Visit our contact page.

Serving Lithia and nearby Valrico, Brandon, Seffner, and Wimauma. See our full service area list or learn more about our team.